In order to update your router’s security settings follow these easy steps:

Step1 (Log in to your router)

To log in to your router run Internet Explorer (or your default browser), enter the IP address of your router in the address bar and hit Enter. To find your IP address in Windows press the windows key and the key “R” at the same time. In the new window, type “cmd” and hit Enter, then type “ipconfig” and hit Enter. Now, under “Wireless LAN adapter Wireless Network settings” you should have Default Gateway followed by an array of numbers devided in 4 groups by dots. That is your router’s IP.

Step2 (Login)

After hitting Enter, you will see a login prompt appear on your screen.
To login, use the following system username and password in the prompt box.

Username: admin
Password: admin

Step3 (Wireless Settings)

Hide SSID Settings

To hide your router’s SSID, Go to Advanced > Wireless Performance. This will display the Wireless Settings where you can configure your wireless network. To hide the SSID (Service Set Identification) select “Enabled” option next to Hidden SSID. This will hide your wireless network from the clients searching for wireless connections and thereby protect your network from hackers.

To make your wireless network safe, you should select the appropriate security option.

To do, so click Go to Home > Wireless Settings.

This router supports 64/128-bit WEP and WPA encryption.

It is recommended to use WPA security.

WPA Security Mode

Select the PSK Hex radio button and type your secret passphrase key using Hex.
.
To save the setting changes you have made to your router, click Apply.

Well done! You have now secured your router!